{"product_id":"holley-30-x-14-hydramat-rectangle-16-110","title":"Holley 30\" x 14\" HydraMat®, Rectangle - 16-110","description":"The amazing HydraMat® is Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling.  HydraMat is the solution!\n\nSurface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity.\n\nHydraMats are available in various sizes and shapes to fit a variety of stock fuel tanks and\/or race fuel cells.\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePatent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells\u003c\/li\u003e\n\u003cli\u003eGreatly reduces the potential for air to enter into the fuel system which can result in poor engine performance and\/or engine stalling\u003c\/li\u003e\n\u003cli\u003ePerfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions\u003c\/li\u003e\n\u003cli\u003eSurface tension and fluid wicking allow the HydraMat to continue to draw fuel from the tank or cell even when part of the mat uncovered\u003c\/li\u003e\n\u003cli\u003eAs an area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available\u003c\/li\u003e\n\u003cli\u003eUnique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions\u003c\/li\u003e\n\u003cli\u003eEliminates the need for specialty reservoirs, sumps  and pick up pumps saving cost and greatly reducing complexity\u003c\/li\u003e\n\u003cli\u003eAlso acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump\u003c\/li\u003e\n\u003cli\u003eCan be folded and compressed for easy installation through a variety of fuel cell openings\u003c\/li\u003e\n\u003cli\u003eHydraMats are also available in other sizes and shapes to fit a variety of stock fuel tanks and\/or race fuel cells\u003c\/li\u003e\n\u003cli\u003eWorks with Alcohol, Ethanol, Methanol, and E-85 fuels\u003c\/li\u003e\n\u003cli\u003eWorks with 2-cycle oil blends as high as 20:1\u003c\/li\u003e\n\u003cli\u003eNot for use with most oils (see previous point for exceptions)\u003c\/li\u003e\n\u003cli\u003eNot for use with diesel fuels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eProduct Specifications:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Details:\u003c\/strong\u003e Center and Side outlet pick-ups with -10AN fitting. Fitting locations designed for universal use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdapter AN Size:\u003c\/strong\u003e 10 AN Male\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Beige\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade Type:\u003c\/strong\u003e Performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 30 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicron:\u003c\/strong\u003e 15\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutlet:\u003c\/strong\u003e Center\/Side\/Side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Type:\u003c\/strong\u003e Fuel Tank Pickup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e HydraMats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreen Micron Rating:\u003c\/strong\u003e 15 UM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 14 inches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes:\u003c\/h3\u003e\n\u003cp\u003eFitting locations designed for universal application use\r\n\r\nDesigned to fit flat bottom rectangular style fuel cells with minimum dimensions of 30\" long and 14\" wide\r\n\r\nFor best performance, the return fuel should be discharged near the pick-up of the HydraMat at a minimum distance of 1 inch above the mat.\r\n\r\nFor in-tank fixed stud mounting, Click Bond stud kits are recommended.  Kits can be purchased from aircraft supply retailers such as Aircraft Spruce.\u003c\/p\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":49710105297134,"sku":"HLY-16-110","price":1049.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0819\/9110\/6798\/files\/7d12c541c37afac6e12e2095e64cbe4ddb0885db.jpg?v=1791514346","url":"https:\/\/elmosspeedshop.com\/products\/holley-30-x-14-hydramat-rectangle-16-110","provider":"Elmo's Speed Shop","version":"1.0","type":"link"}