Holley Track Warrior Carburetor - 0-67200BK
$870.95
Skip to product information
Holley is proud to introduce the all new aluminum Track Warrior carburetors. They utilize the best features from Holley's Race Bred Classic 4150 HP™ carbs, and we have added billet metering blocks, billet base plate, and knurled (hand adjustable) curb idle screws. The Track Warrior features an aluminum contoured main body design and has screw in air bleeds for precision tuning capabilities. The all new aluminum Track Warrior weighs up to 40% less and adds horsepower and torque, pushing on the track performance to the next level!!
Holley Track Warrior Carburetor - 0-67200BK
$870.95
Features:
- Aluminum construction for weight savings and long lasting good looks in purple or black
- Optimized race calibrations for outstanding throttle response
- Contoured venturi inlet offers balanced airflow for increased horsepower
- Screw in air bleeds for precision tuning capabilities
- Four corner idle for precise idle control
- Mechanical secondaries for awesome tire turning performance
- The billet metering blocks feature improved durability over cast blocks, true gasket sealing and fully adjustable (emulsion bleeds, power valve channel restrictors & idle feed restrictors)
- Available in 650, 750, and 850 CFM versions
- Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing
- 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
Product Specifications:
- Product Details: 750 CFM - 4150 - Mechanical Secondaries - Shiny - Gasoline
- Adjustable Air Bleeds: Yes
- Adjustable Emulsion Bleeds: Yes
- Adjustable Idle Feed Restrictors: Yes
- Air Cleaner Flange Diameter: 5-1/8
- Barrel Quantity: 4
- Barrels: 4
- Barrels Quantity: 4
- Billet Color: Black
- Body Color: Polished
- Body Finish: Polished
- Body Material: Aluminum
- Booster: Downleg
- Booster Design: Downleg
- Brand Family: Track Warrior
- Carburetor Material: Aluminum
- Carburetor Use: Performance and Race
- CFM: 750
- CFM Rating: 750
- Choke: None
- Choke Type: None
- Circuit Count: 2
- Color: Polished/Black
- Condition: New
- Cubic Feet Per Minute Rating: 750
- Finish: Polished/Black
- Flange Shape: Square
- Flange Type: Square/4150
- Float Level: Externally Adjustable
- Fuel: Gasoline
- Fuel Inlet: Dual
- Fuel Inlet Center to Center: 9.5
- Fuel Inlet Count: Dual
- Fuel Inlet Type: 5/8-18 Inverted lare
- Fuel Type: Gasoline
- Gasket Or Seal Included: Yes
- Grade Type: Race
- Linkage Attached: Yes
- Marine Approved: No
- Marine Use: No
- Material: Aluminum
- Meter Block Material: Billet Aluminum
- Metering Block Color: Black
- Model: 4150
- Mounting Hardware Included: No
- Mounting Hole Quantity: 4
- Part Type: Carburetor
- Primary Float Type: Center Hung Nitrophyl
- Primary Jet Diameter: 80
- Primary Main Jet Size: 80
- Primary Power Valve: 6.5
- Primary Pump Nozzle Size: 31
- Primary Throttle Bore Diameter: 1.688
- Primary Venturii Diameter: 1.375
- Product Type: Carburetor
- Secondaries: Mechanical
- Secondary Barrel Type: Mechanical
- Secondary Float Type: Center Hung Nitrophyl
- Secondary Jet Extensions: No
- Secondary Main Jet Size: 90
- Secondary Pump Nozzle Size: 31
- Secondary Throttle Bore Diameter: 1.688
- Series: Track Warrior
- Spacer Included: No
- Supercharged Application: No
- Throttle Bore Diameter: 1.688 inch
- Vacuum Ports: 1 timed (spark) port, 2 full, and 1 PCV port
- Venturii Size: 1.375 inch
Installation Notes:
This model of carburetor has the square bore flange bolt pattern. It can replace Holley, Edelbrock, Carter AFB, and Autolite style carburetors with 5 3/16" x 5 5/8" bolt pattern. If you have a spreadbore style intake manifold, you will need an adapter to install this carburetor. Similar to the Mr. Gasket #1932.