Hooker Super Competition Long Tube Headers - Ceramic Coated - 6208-1HKR

Hooker Super Competition Long Tube Headers - Ceramic Coated - 6208-1HKR

$1,399.95
Skip to product information
Hooker Super Competition Long Tube Headers - Ceramic Coated - 6208-1HKR
  • Hooker Super Competition Long Tube Headers - Ceramic Coated - 6208-1HKR
  • Hooker Super Competition Long Tube Headers - Ceramic Coated - 6208-1HKR
Hooker Super Competition Long Tube Headers - Ceramic Coated - 6208-1HKR

Hooker Super Competition Long Tube Headers - Ceramic Coated - 6208-1HKR

$1,399.95
Hooker has a complete line of engine swap headers, front frame mounts and transmission mounts for popular engine swaps. Available for Chevy, Chrysler & Ford small block and big block engines. Hooker swap headers and mounts are designed to provide an exact fit when used together. Hooker swap headers add the extra horsepower and torque the serious enthusiast demands. Hooker Headers are the best single improvement you can make.

Features:

  • Tuned-length primary tubes for maximum exhaust scavenging and velocity
  • Mandrel-bent tubing for smooth exhaust flow
  • Light weight & sturdy 18 gauge tubing
  • Long transition collector for decreased back pressure
  • 5/16” machined flanges for a perfect seal
  • Industry’s best welds for durability
  • Designed for optimal performance
  • All necessary hardware included for a complete installation

Product Specifications:

  • Product Details: 1964-1970 Mustang/Cougar: 351W, Full Length Tube Size 1.75" x 32", Collector Size 3", Collector Length 8", Port Shape: Same as Port
  • Air Injection Tubes: No
  • Bolt Size: 3/8-16 x 3/4 IN
  • Bolts Included: Yes
  • California Proposition 65: Yes
  • California Proposition 65 Chemical List: Chromium, Nickel
  • CARB (California) Compliant: For Pre-1975 Vehicles only
  • Collector Attachment: 3-Bolt Flange
  • Collector Diameter: 3.00 IN
  • Collector Reducer Included: No
  • Collector Reducer Outlet Diameter: N/A IN
  • Color: Silver
  • Design: Long Tube
  • Drive: 2WD
  • EGT Port: No
  • Engine: Ford Small Block
  • Finish: Ceramic Coated
  • Flange Thickness: 5/16 IN
  • Gasket Or Seal Included: Yes
  • Grade Type: Performance
  • Header Series: Super Competition
  • Header Style: Long Tube
  • Material: Mild Steel
  • Mounting Hardware Included: Yes
  • Oxygen Sensor Port: No
  • Port Shape: Rectangle
  • Primary Tubing Diameter: 1 3/4 IN, 1.75 IN
  • Product Type: Headers
  • Quantity: Sold as a Pair
  • Tube Wall Thickness: 16 GU

Installation Notes:

Will fit with Dart Windsor head. Requires the use of 1966 and later motor mounts and frame mounts Ford P/N D00Z6038G and because of possible chassis sag, the shock towers must measure a minimum of 33-3/4" measured between the top of the shocks. Header will fit with C-6 transmission. Will not fit heads with raised exhaust ports. See instructions for other notes. Do not use header wraps; they can cause header tube cracking from excessive heat or rust from moisture build-up and void the warranty. Breaking in an engine with ceramic-coated headers can damage the coating and void the warranty. Use cast-iron exhaust manifolds or old headers during engine break-in to prevent coating damage. Ceramic-coated headers require several heat cycles to fully cure before withstanding extreme heat. For additional information about ceramic-coated exhaust products, call Hooker Technical Service at 270-781-9741.

You may also like